News Center

Company News

Industry News

Media News

Product Information

FAQ

Common Problems and Solutions of Pos Machine Bar Code Scanning Gun

Common Problems and Solutions of Pos Machine Bar Code Scanning Gun

Pos machine bar code scanning gun common problems and solutions, pos cash register system is mainly used in commercial, chain, supermarket and other places, bar code scanning gun is an indispensable part of the cash register system, it can collect commodity bar code data input to the computer, and then realize the processing, management, use, storage or output of these image information. Yongli brand bar code scanning gun 1, problem description: laser is always on. possible reason: scanned the instruction manual and set the bar code to be always on. solution: restore the factory settings and return it to the manufacturer for repair. 2, problem description: scanner scanning, buzzer is normal, numerous reports

22

2017

/

09

Honeywell Barcode Scanner Add/Clear Prefix Character Settings

Honeywell Barcode Scanner Add/Clear Prefix Character Settings

Honeywell barcode scanner to add/remove the prefix and suffix character settings, Shenzhen Hongxing Yongli Electronic Technology Co., Ltd. technical finishing method is as follows:

02

2016

/

09

The reason why blank paper jumps when the bar code machine prints.

The reason why blank paper jumps when the bar code machine prints.

When the bar code machine prints, there is a reason for jumping out of blank paper, and the position of the printed label is also wrong, which indicates that the printer paper detector has not correctly detected the label paper. In response to this situation, Hongxing Yongli summarized the reasons for this situation, hoping to help the majority of users. Zebra barcode printer equipment 1. check printer ribbon and label paper installation. First of all, it is necessary to make sure that the printer's carbon tape and label paper match each other: whether the carbon tape supports printing this label and whether it can be used on this type of printer. Secondly, check whether the ribbon or ribbon is installed backwards. If it is installed backwards, also

04

2015

/

06

The barcode printer does not print normally after replacing the carbon ribbon. The barcode printer cannot detect the carbon ribbon.

The barcode printer does not print normally after replacing the carbon ribbon. The barcode printer cannot detect the carbon ribbon.

The barcode printer does not print normally after replacing the ribbon. The barcode printer cannot detect the ribbon (also called ribbon). Wynn bar code technology analysis is as follows: fault tips: in the bar code printer panel, we can see a number of lights in front, and there is a "CHECKRIBBON" indicator, if the machine in the printing process, "CHECKRIBBON" indicator is abnormal, indicating that the ribbon induction error, the machine will stop printing. Factor 1: The printer user did not install the ribbon correctly. How to install, we in the "Zebra printer ribbon and

05

2017

/

10

How to improve print quality barcode printer temperature settings

How to improve print quality barcode printer temperature settings

The purpose of setting the temperature of the barcode printer is often to improve the quality of the printed image, so the temperature adjustment is often required to adjust the speed of the adjustment. In other words, while adjusting the temperature, some printers are also called printing density, which is the same concept and also adjusts the speed. ZebraZT410 barcode machines follow the principle of progressive combination methods. For example: bar code printer temperature has 1-15, 1-15; speed has 3, 50.8mm/sec, 70.20mm/sec, 101.60mm/sec. Print coated paper labels with mixed-base carbon tape.

08

2016

/

09

< 1...343536...102 >