News Center

Company News

Industry News

Media News

Product Information

FAQ

Why does the battery of the wireless scanner run out of power overnight?

Why does the battery of the wireless scanner run out of power overnight?

One of the common feedback problems of wireless scanners is why the battery of the wireless scanner runs out of power overnight. The reason is actually as follows: the battery in the wireless barcode scanner supports both the decoding circuit and the RF motherboard. When the reader does not work, its decoding circuit part stops working, but the RF motherboard is still constantly contacting the related base stations within the communication distance, even if the base station is shut down, it is constantly searching. The rechargeable battery can last for 12 hours without the scanner being used, so during the night, the battery should be charged to ensure full support for the next day's work. Wynn

10

2020

/

07

Thermal transfer barcode printer ribbon/ribbon

Thermal transfer barcode printer ribbon/ribbon

The bar code printer of thermal transfer mode needs a special ribbon to print information such as bar code and text on the label. This special ribbon (commonly known as ribbon), generally by the base film, heat-resistant coating, ink coating and other three parts. The internal structure of the carbon ribbon of the thermal transfer bar code printer is on the thermal transfer printer. The heat-resistant coating is in direct contact with the thermal transfer head, and the thermal transfer ink is in direct contact with the substrate (label). During operation, the thermal transfer head instantly releases heat. The heat of the hot spot is transmitted to the thermal transfer ink coating through the heat-resistant coating and base film. The ink is melted and hot stamped on the substrate to form text and images. High quality color

10

2020

/

07

Zebra GX430t barcode print head repair replacement print head method

Zebra GX430t barcode print head repair replacement print head method

After the bar code printer is purchased, the maintenance and cleaning of the bar code printer should be paid attention to, especially the cleaning of the bar code print head is particularly important. The method of repairing and replacing the print head of the zebra GX430t bar code print head is introduced below. The cleaning and steps of the zebra gx430t printer are as follows: 1. How to clean the print head and 2. The replacement method of the print head. Important tips for cleaning the Zebra gx430t barcode print head • Using too much alcohol may wet the electronic components, so it must be dried for a long time before the printer can work normally. Clean the print head Always use a new cleaning pen

10

2020

/

07

Zebra ZT230 barcode printer setting method

Zebra ZT230 barcode printer setting method

Zebra ZT230 barcode printer setting method: 1. Handle the barcode printer, 2. Select the location for the barcode printer, 3. Select the data communication interface, 4. Connect the printer power supply, 5. Select the print mode, 6. Load the ribbon, 7. Load the media. When operating the zebraZT230 printer, pay attention to keep the barcode printer itself from being damaged. Zebra ZT230 barcode printer handles unpacking and checking the printer. When receiving the barcode printer, you should immediately unpack and check for damage during transportation. · Preserve all packaging materials.

10

2020

/

07

Does the label paper/carbon tape have any effect on the barcode printer?

Does the label paper/carbon tape have any effect on the barcode printer?

Does the quality of label paper and printing ribbon/ribbon have any influence on barcode printers? Shenzhen Hongxing Yongli Electronic Technology Co., Ltd. can clearly tell everyone that it has a very important influence. 1, the correct operation: the user's operation is correct, the length of the service life of the bar code printer has a great impact, such as temperature, pressure and other machine settings and applications, the correct use of the bar code ribbon cleaning and so on. 2, the implementation of maintenance: whether the implementation of general maintenance according to the use of the situation, and whether the maintenance action is correct (including the use of maintenance equipment and methods), and regular professional maintenance adjustment is complete

10

2020

/

07

< 1...474849...104 >