News Center

New World NLS-HR15XX-3E(HR15Z) wireless gun use skills

Release Time:2020-07-29

1. The pairing of the barcode gun and the base

There are two ways to pair the new world wireless gun before. One is to set the channel of the scanning gun and the base through the setting manual. The method is a bit complicated and difficult to master. The other is to scan the bar code of the base directly. This method is relatively simple, but if the bar code of the base is damaged, it will be a little troublesome.

The Newland Wireless Gun takes a simpler approach. Is to put the new continent scanning gun on the base, and then press the red M key, then the scanning gun will display a green light, that is, to complete the pairing settings. When the scanning gun is not on the base, press the red M key to find the matching scanning gun, and it can also be used to find the scanning gun function.

2. Charging.

Generally, there are two charging methods for wireless guns. One is to connect the power supply directly to the tail of the wireless gun. Although this charging method is fast, it is inconvenient and does not know how much it has been charged. The second is to connect a USB cable to the bottom, and then connect the USB cable to the receiving base. It is also very inconvenient to pull out the USB cable after charging.

The New World HR15Z only needs to put the scanning gun on the base and charge directly with USB, or connect the power supply to the base to charge faster. The power of the scanning gun can be known through four small green lights. All four small green lights indicate that the power is full. When charging, the indicator light on the top of the wireless gun lights up red, and when full, the indicator light on the top of the wireless gun turns green. Charging and power status can be easily and clearly known.

3. Communication mode

New World HR15Z wireless gun has three communication modes, namely synchronous mode, asynchronous mode, and batch mode.

Synchronous mode: real-time upload, no transmission under network conditions;

Asynchronous mode: upload in real time when there is a network, store it on the wireless gun when there is no network, and resume uploading when there is a network;

Batch mode: first store the data on the gun, and place the scanning gun on the base and press the blue P key on the base to complete batch uploading. The mode is converted by scanning a barcode.

4. Reading mode

New World HR15Z wireless gun has 7 scanning modes, namely manual reading; Automatic reading; Intermittent reading; Induction reading; Continuous reading; Extended reading; Command trigger reading. Xiaobian mainly and introduce automatic reading mode. This is very helpful for reading the serial numbers of a large number of products. When the scanning gun is set to automatic reading mode, the bar code can be read continuously as long as the trigger is pressed, and the code reading will not be stopped until the trigger is pressed again. By default, the same barcode is not read repeatedly. So it is very convenient for reading the serial number.