News Center

Zebra barcode printer restore factory settings operation method

Release Time:2020-07-21

how to restore factory settings zebra printer? hongxing yongli barcode industry based on many years of experience, to introduce 8 models of commonly used zebra barcode printer model of restore factory operation methods. Hongxing Yongli after-sales technical service telephone: 0755-28225517-8036

　　

 

1. Zebra 105SL PLUS Zebra Barcode Printer Restore Factory Settings: Press "SETUP" twice, then press ""-"to turn pages, find" LOADDEFAULT ", then press" SAVE ", barcode printer will automatically feed paper, restore factory settings, and switch on and off again.

2. Zebra ZM400 Zebra Barcode Printer Restore Factory Settings: Turn off the printer, press and hold the "Pause Key (PAUSE)" and "Paper Out Key (FEED)" without letting go, and then turn on the printer. After the status indicator goes out, release the "pause button (PAUSE)" and "paper output button (FEED)", and the machine will automatically restore the factory settings.

3. Zebra ZT420 Zebra Barcode Printer Restore Factory Settings: Turn it off, press and hold the FEED PAUSE key to turn it on at the same time, release it after about 10 seconds, and the printer will automatically restore factory settings.

4. Zebra S4M Zebra Bar Code Printer Restores Factory Settings: Shut down, press and hold the paper output key at the same time, and turn on the pause key. After about 8 seconds, let go, the printer will restore factory settings.

5. Zebra 110Xi4 Zebra Barcode Printer Paper Recognition Method: Turn off the machine and press and hold the FEED PAUSE key to turn on the machine until the light of the first control panel goes out (about 10 seconds later) and the printer will automatically restore the factory settings.

6. Zebra 105SE Zebra Barcode Printer Paper Measurement: In the power-on state, press MODE three times, and then press FEED key, and the printer will automatically perform paper measurement.

7. Zebra Z4M Zebra Bar Code Printer Paper Measurement: Press and hold the pause key to start the machine. Whether the zebra bar code print head has a broken needle: press and hold the pause button for 8 seconds and then release it. the bar code printer prints out a black bar code label paper. check whether there is a white line on the adhesive label. if there is a broken needle, the printed bar code will probably not be scanned.

8. Zebra GK888T Zebra Bar Code Printer Restore Factory Settings Method: In the startup mode, press and hold the FEED key for a few seconds, and the green status indicator light will flash several times, incrementally once each time. Please let go after flashing 4 times, and the printer will restore factory settings at this time. (PAUSE) "and" FEED ", the machine will automatically restore the factory settings.