News Center

Zebra 105sl plus barcode printer cleaner preparation

Release Time:2020-07-21

Anyone who has used a bar code printer knows that the bar code print head is an important part of the bar code printer, so how should the bar code printer clean the print head? The following is a small compilation of zebra 105sl plus bar code print head cleaning work preparation, alcohol. provide everyone reference!

　　

 

Print head cleaning and platen roller, bar code print head cleaning is the focus. Barcode machine print head cleaning and platen roller steps:

1. Rotate the print head opening lever.

　　

 

2. Gently remove the printer media and ribbon.

3. Using a cotton swab, gently wipe the print head. Cotton swabs can be soaked in isopropyl alcohol (not less than 90%) and deionized water (not more than 10%) solution, before use need to let the solution volatile clean.

　　

 

4. Rotate the paper roller and clean it with a cotton swab to facilitate the volatilization of the solution.

5. Load the media and barcode printer ribbon.

6. Press the print head (1), and then rotate the print head opening lever (2) until it locks into place.

Matters needing attention when cleaning the print head

• The print head should be sufficiently cooled before cleaning, otherwise the print head temperature is high, which may cause serious burns.

• To release accumulated static electricity, touch the printer metal bracket or use an anti-static wrist strap or pad to prevent static electricity before touching the print head.