News Center

Test method of newly bought bar code scanning gun

Release Time:2020-07-21

For the testing method of the newly bought bar code scanning gun, customers have been asking us how to use the new scanning gun, whether software needs to be installed, how to test the performance of the scanning gun, etc. The following articles are tested and sorted out by Hongxing Yongli scanning gun from the following:

　　

 

Wynn Scanning Gun

First of all, when you buy the applicable barcode scanning gun, you will connect the equipment to try it out. When we get the scanning gun, we will connect it in the correct way. After connecting it, we can turn it on by pressing the key. When we turn it on, the indicator light will be on and a clear buzzer will sound, indicating that the scanning gun is successfully connected. If there is a problem with the connection, we will find out the reason. The specific general reason and solution are written in our previous article. You can look at it yourself. If you don't understand it, you can also consult on our official website, or call our online customer service.

Then, many customers in the test, usually see the manual on the set bar code, will go to scan, this is wrong! Because you don't know, the setting codes in this manual are some command bar codes for setting up the scanning gun. These bar codes can only be used to change the setting of the scanning gun, but they can't be uploaded. If you test like this, you will find that the scanning gun has various conditions, that is, it can't be used normally, so the system will have problems. Therefore, remind users and friends that you must not use the setting codes in the manual to test the scanning gun, if you want to set up some functions of the scanning gun, follow the instructions after carefully reading the instructions of the Wynn scanning gun.

　　

 

Correct test method: on the connected computer or mobile phone, open an input text document (TXT,WORD,EXCEL, etc. or SMS, QQ, WeChat dialog box, etc.), click the cursor into the document or dialog box, under the condition of ensuring the normal connection of the scanning gun, turn on the scanning gun, scan with the bar code on some commodities (food boxes, beverage bottles) or express orders, etc., and the indicator light of the scanning gun flashes, the buzzer beeps and the corresponding barcode information appears in the document or dialog box, which indicates that the barcode scanning gun is normally transmitted and the Yongli scanning gun can be used normally.