News Center

Installation and setting method of label barcode printer

Release Time:2012-06-14

Installation and setting method of label barcode printer

As a dual-purpose printer for industry and commerce, bar code printer is becoming more and more popular in people's life. The installation and setting method of label bar code printer is organized by Hongxing Yongli to provide reference for everyone to learn:

The first step:

When we get a label barcode printer, the necessary operation is to install the power supply, data cable and consumables. Although simple, but in the actual operation of the user will forget.

The second step:

Calibration paper, this operation is to allow the label bar code printer to identify the label normally, to ensure that the label can be accurately transported during printing, so as to avoid waste.

Step 3:

After the most basic operation is completed, the working mode of the label printer needs to be set according to our use requirements. For example: "Do I print thermal labels or thermal transfer labels?", "Do I need to tear paper after printing? Cut paper? Or peel paper?" and so on, all need to do the corresponding settings in the label printer to achieve. To set these functions, users need to set them through the operation panel and LCD screen menu before printing, find the corresponding functions and select them, which is simple and quick. The LCD menu setting function of the label printer is very complete, including: printing blackness, speed, interface language, printing method, paper tearing mode, paper cutting mode, paper peeling mode, detection method, serial buckle rate, check bit, data bit, date and time, network port, default gateway, IP address, subnet mask, detection length, offline printing, and offset adjustment of paper tearing, positioning, paper cutting and paper peeling, print content horizontal, vertical offset adjustment......

Step 4:

Computer-side settings, including the driver and printing software settings. Again, these are based on the actual situation of the user. Users often ask: "How should I set the label size?" "How much print blackness should I set?" "How to design the label layout I need" and other similar questions, these questions can be set in the software section.

Key steps to set up:

① Type of label;

Including: labels positioned with spacing, labels positioned with black marks, labels positioned with round holes or continuous paper, which can be set in the drive.

② Actual size of label;

Measure the height and width of the actual label with a ruler, and set it in the corresponding position of the software (note: error in height can easily lead to interlaced printing). At the same time, if the label has multiple rows and columns, the label height should be filled in the number of rows and columns in the software.

③ Material of label;

According to the different label materials, the user needs to select the matching carbon tape for printing, and the blackness setting of printing also needs to be adjusted accordingly. For details, please consult the local consumables sales point.

Precautions

After completing the above four steps, users can start to design according to their own label content and typesetting requirements, usually in the printing software that comes with the label printer.