News Center

How to Install a Scanner Quick Install Barcode Scanner Gun Tutorial

Release Time:2020-07-10

How to install the scanning gun is a common problem for new users to purchase, and does the barcode scanning gun need to be installed with a driver, etc. In fact, these are not needed. Installing the scanning gun is relatively simple. Hongxing Yongli Xiaobian teaches you a quick one-minute tutorial on installing the barcode scanning gun [graphic]].

1. When you open the packing box, there are code scanning gun, data cable, manual and warranty card inside

2. Link the code scanning gun with the following figure method of the data line (please pay attention to the direction of the data line)

3. Insert the other end of the data cable into the USB port of the computer, and the computer will automatically install the driver

4. The link is completed, so that you can scan the barcode of the commodity with the code scanning gun or scan the mobile phone screen WeChat Alipay code scanning collection function!

How to dismantle the code scanning gun? -- Do not pull hard to avoid damaging the code scanning gun.

1. Unplug the code scanning gun data cable from the USB of the computer

2. Use a hard thin object (such as a paper clip) to poke it in at the small hole on the handle of the code scanning gun

3. When you hear a "click", you can easily pull out the data cable.