News Center

Zebra printer print head life extension must see

Release Time:2013-06-28

Zebra printer print head life?

General zebra labeling machine print head life is not the length of time to calculate. However, it is calculated by the printing length. Generally, the normal service life of the printing head is about 30km ~ 50km. How many labels can be printed? Consumables are directly in contact with the printing head. Therefore, the quality requirements for consumables must not be evaluated only at price. Otherwise, because the cheap label paper hurts the expensive printing head, it will do more harm than good. After testing, regular and reasonable maintenance of the print head required for the meager expenditure, saving several times or even dozens of times the cost of equipment maintenance or renewal. Zebra printer print head life extension must see

The barcode print head plays a very important role in the barcode printer, which directly affects the print quality.

Then the damage of the print head of the zebra printer mainly comes from the wear caused by high-speed printing. The high-temperature environment makes the thermal paper (thermal bar code printer) or ribbon (thermal transfer label printer) dirty print head, and the print head cracks and deformation caused by high pressure or static electricity. Once the print head is damaged, there are white lines in the printed label (a row of element points in the print head are dirty or scratched, as indicated by the arrow in the figure below), and the printed label is blurred and the reader cannot read the data.

Zebra Printer Print Head Film

Print head film is a special film film can remove the dirt on the print head without damaging the print head. There are many benefits to using save print head cleaning film: in addition to extending the life of the print head, it can also reduce the downtime required for maintenance and save the cost of replacing the print head. Therefore, it is an economical, convenient and fast way to remove dirt and scale without removing the print head.

Minimize premature printhead failure due:

Wear-the print head is damaged due to friction, which may also be caused in normal use. Wear can be minimized through good maintenance;

Pollution-such as dust will cause damage to the print head;

Erosion-due to paper and incorrect cleaning may cause progressive damage to the print head;

ESD-unreasonable operation and environmental factors;

Moist --- the printer will cause damage to the print head when used in a humid environment;

Back coating adhesion and fouling --- unreasonable maintenance cleaning poor quality and other factors accumulated dirt will lead to print quality such as printing or partial printing.

1

Hongxing Yongli [www.xingyongli.com] recommend uses the formal cleaning method of Zebra Company. Please refer to the built-in instructions of Zebra Printer for details on how to clean the Zebra Barcode Printer.