What is the reason why the bar code printer is inaccurate

Release Time:2020-07-10

What is the reason for the inaccurate paper feeding of bar code printers? Paper feeding of printers is one of the common problems of bar code printers. Please make problem elimination tests according to the solutions provided by Hongxing Yongli Technology below:

Zebra barcode printer 888t

1. Please make sure whether the barcode printer paper and carbon tape are installed?

2. Check whether the paper sensor is adjusted within the width of the paper (please adjust the tag paper to the edge of the paper on the hole). If not, turn the sensor knob. (When rotating in the direction of the clock, the sensor moves outward, and vice versa).

3. Check whether the barcode machine sensor is stuck to the paper or there is something dirty. If so, please clear the paper or take a small brush to brush the sensor.

4. Check whether the label length set by the software is the same as the actual paper.

5. Adjust the bottom paper voltage value.

Recommend

Shenzhen Hongxing Yongli Company Headquarters Relocation Notice

Thanks to your long-term strong support and cooperation, here, Hongxing Yongli all staff would like to express our heartfelt thanks! Due to the needs of our business development and the expansion of the company's scale, the company will move to a new office address from July 20. The specific contact information is attached.

Learn more