News Center

How to Set One Row and Three Column Barcode for Zebra Printer

Release Time:2020-07-10

How to set up a row and three columns of bar codes for zebra printers requires the installation of common software Bartender bar code printers, which can be set up in bar code software. Hongxing Yongli Xiaobian explains the specific operation methods as follows:

1. Open the Bartender, create a new "blank label format", and then click directly to finish

2. Set Page: File-> Page Setup.

 

Select the paper, then the paper size can be selected "user-defined size (if there is no change option, you can create a new paper size to be set first)", and the paper width and height can be entered into the size of the label paper, as shown in the following figure:

Enter the number of rows, the number of columns, the left and right margins, and the spacing between labels in each column, and then determine, as shown in the following figure:

Enter in the blank, as shown in the following figure

Then select 6 copies when printing, and then preview it first, so that you can see the effect of the design.

Analysis before typesetting: each label to be printed has a width of 30mm and a height of 20mm. assuming that the left margin is 2mm, the right margin is 2mm, and the interval is 2mm, plus the spacing of each column is 2mm, then the whole paper should be 98mm. general label manufacturers process labels in this way, and users can adjust according to the actual situation.