News Center

New test method for wireless scanning gun

Release Time:2015-09-18

How to test the new machine of wireless scanning gun, and the literacy test of wireless scanning gun. The wireless scanning gun is different from the wired scanning gun. It has no data line, but it has a base. Before scanning the barcode, it is also necessary to pair the wireless scanning gun with the base first. Why do you want to pair? Because only after pairing can the scanned barcode data be transmitted to the computer terminal. Details of the reference: serial data line and scanning gun computer connection method

　　

14

 

Wireless scanning gun base function: in fact, it is a wireless scanning gun and computer terminal connection of a medium. Like a "wireless antenna", with it, the wireless scanning gun can establish contact with the computer terminal and transmit the scanned bar code data to the computer. Therefore, the two must be established before use, the professional term is called "pairing". Here we take the Motorola wireless scanning gun as an example.

1) Connect one end of the data cable with the crystal head to the base, and connect the other end to the corresponding interface of the computer. At this time, the computer will automatically install a driver. Wait for it to install automatically.

　　

1

 

2) Scan the barcode on the base with a wireless scanning gun, and the pairing is successful. Note: Different brands may have different pairing methods for wireless scanning guns. Please refer to the instructions.

　　

1

 

3) Open a notepad, Word document or Excel and other software with flashing cursor on the computer, that is, as long as the keyboard can be input, then the wireless scanning gun can start scanning bar codes, and bar code data will be transmitted to the computer in real time. If the transmission is successful, the wireless scanning gun test can be used normally.

The above test process is suitable for most brands of wireless scanning guns. Due to different brands, the structure and configuration of the wireless scanning gun may be slightly different, please refer to the introduction of your wireless scanning gun manual. Another point to note is that some wireless scanning guns are transmitted instantly, that is, when the wireless scanning gun scans the barcode, the barcode data will be immediately transmitted to the computer, while some wireless scanning guns support batch transmission mode, that is, after the barcode to be scanned is scanned, it will be transmitted to the computer through the base.