News Center

Adhesive label is best dedicated bar code printer

Release Time:2014-06-05

It is best to use a dedicated bar code printer for adhesive labels. It is best to use a dedicated bar code printer instead of using a laser printer for adhesive printing. Although the bar code printed by the laser printer can be read, frequent use will cause great damage to the printer.

1

Reason 1: Both laser printers and bar code printers use heating to melt toner into paper. Laser printers are heated by toner cartridges, with high temperature and large heating area.

Reason two: once the glue is heated at high temperature, some of it will flow out of the paper because of high temperature and extrusion, and this part of the glue will stick to the toner cartridge, which will cause great damage to the toner cartridge.

Reason 3: The special bar code printer for adhesive sticker integrates the carbon tape installed inside into the label paper through the print head, with a heating width of less than 0.5mm and a small heating area.

Reason 4: Because it is a special adhesive label printer, the temperature and heat dissipation method are designed by professional technology, so the printed bar code label has no sticky feeling.

Reason 5: In addition, when the laser printer prints adhesive text, it is very light, very white and the font looks unreal. Barcode printers cost about the same as laser printers. Therefore, if you want to print a sticker, it is best to use a dedicated barcode printer, which is not only applicable but also relatively cheap.